MSExchange Store Driver: "- 已使用 Google 工具列寄出"
Event Type: Error
Event Source: MSExchange Store Driver
Event Category: MSExchangeStoreDriver
Event ID: 1020
Date: 2009-11-26
Time: 03:20:17
User: N/A
Computer: SE-EX003
Description:
The store driver couldn't deliver the public folder replication message "Status (MY-EX002-IS@logicacmg.com)" because the following error occurred: MapiExceptionDuplicateDelivery: Unable to deliver message. (hr=0x80004005, ec=2603)
2010/11/15
2010/11/12
Failover Cluster Step-by-Step Guide: Configuring a Two-Node File Server Failover Cluster
Failover Cluster Step-by-Step Guide: Configuring a Two-Node File Server Failover Cluster: "Failover Cluster Step-by-Step Guide: Configuring a Two-Node File Server Failover Cluster
- 已使用 Google 工具列寄出"
- 已使用 Google 工具列寄出"
2010/11/09
Deploying High Availability and Site Resilience: Exchange 2010 Help
Deploying High Availability and Site Resilience: Exchange 2010 Help:
"Overview of the Deployment Process
While the actual steps used by each organization may vary slightly, the overall process for deploying Exchange 2010 in a highly available or site resilient configuration is generally the same. After performing the necessary planning and design tasks for building and deploying a database availability group (DAG) and creating mailbox database copies, you would:
1. Create a DAG. For detailed steps, see Create a Database Availability Group.
2. Add two or more Mailbox servers to the DAG. For detailed steps, see Manage Database Availability Group Membership.
3. Configure the DAG properties as needed:
1. Optionally configure DAG encryption and compression, replication port, DAG IP addresses, and other DAG properties. For detailed steps, see Configure Database Availability Group Properties.
2. If the DAG contains three or more Mailbox servers that are deployed in multiple Active Directory sites, Datacenter Activation Coordination (DAC) mode should be enabled. For more information, see Understanding Datacenter Activation Coordination Mode.
3. For detailed steps about how to create a DAG network, see Create a Database Availability Group Network. To manage a DAG network, see Configure Database Availability Group Network Properties.
4. Add mailbox database copies across Mailbox servers in the DAG. For detailed steps, see Add a Mailbox Database Copy.
- 已使用 Google 工具列寄出"
"Overview of the Deployment Process
While the actual steps used by each organization may vary slightly, the overall process for deploying Exchange 2010 in a highly available or site resilient configuration is generally the same. After performing the necessary planning and design tasks for building and deploying a database availability group (DAG) and creating mailbox database copies, you would:
1. Create a DAG. For detailed steps, see Create a Database Availability Group.
2. Add two or more Mailbox servers to the DAG. For detailed steps, see Manage Database Availability Group Membership.
3. Configure the DAG properties as needed:
1. Optionally configure DAG encryption and compression, replication port, DAG IP addresses, and other DAG properties. For detailed steps, see Configure Database Availability Group Properties.
2. If the DAG contains three or more Mailbox servers that are deployed in multiple Active Directory sites, Datacenter Activation Coordination (DAC) mode should be enabled. For more information, see Understanding Datacenter Activation Coordination Mode.
3. For detailed steps about how to create a DAG network, see Create a Database Availability Group Network. To manage a DAG network, see Configure Database Availability Group Network Properties.
4. Add mailbox database copies across Mailbox servers in the DAG. For detailed steps, see Add a Mailbox Database Copy.
- 已使用 Google 工具列寄出"
Database Availability Group Design Examples: Exchange 2010 Help
Database Availability Group Design Examples: Exchange 2010 Help: "
A two-member DAG is the smallest possible DAG that can provide high availability. Two-member DAGs are best suited for organizations that require some form of high availability for mailbox services and data, but that don't require site resilience. This configuration works especially well in small office and branch office deployments because it enables redundancy for the Client Access, Mailbox, and Hub Transport server roles using only two Exchange servers. The following figure illustrates this configuration.
Two-member database availability group
Two-Member Database Availability Group
- 已使用 Google 工具列寄出"
A two-member DAG is the smallest possible DAG that can provide high availability. Two-member DAGs are best suited for organizations that require some form of high availability for mailbox services and data, but that don't require site resilience. This configuration works especially well in small office and branch office deployments because it enables redundancy for the Client Access, Mailbox, and Hub Transport server roles using only two Exchange servers. The following figure illustrates this configuration.
Two-member database availability group
Two-Member Database Availability Group
- 已使用 Google 工具列寄出"
Create a Database Availability Group: Exchange 2010 Help
Create a Database Availability Group: Exchange 2010 Help: "- 已使用 Google 工具列寄出"
This example creates a DAG named DAG1 that is configured to use the witness server EXHUB1 and the local directory C:\DAG1. DAG1 is also configured to use DHCP for the DAG's IP addresses.
New-DatabaseAvailabilityGroup -Name DAG1 -WitnessServer EXHUB1 -WitnessDirectory C:\DAG1
2010/11/08
Outlook Connectivity Test
Outlook Connectivity Test: "
Test-OutlookWebServices
- 已使用 Google 工具列寄出"
Watson report about to be sent for process id: 6156, with parameters: E12, c-RTL-AMD64, 14.01.0218.015, RemotePowershell, M.Exchange.Management, M.E.M.TestOutlookConnectivityTask.GetDefaultTestAccount, M.E.Monitoring.MailboxNotFoundException, 327c, 14.01.0218.013.
Failed to find the mailbox. Mailbox ='extest_95536ac1a0374@newvsi.local'.
Test-OutlookWebServices
- 已使用 Google 工具列寄出"
Watson report about to be sent for process id: 6156, with parameters: E12, c-RTL-AMD64, 14.01.0218.015, RemotePowershell, M.Exchange.Management, M.E.M.TestOutlookConnectivityTask.GetDefaultTestAccount, M.E.Monitoring.MailboxNotFoundException, 327c, 14.01.0218.013.
Failed to find the mailbox. Mailbox ='extest_95536ac1a0374@newvsi.local'.
Diagnose Availability Service Issues: Exchange 2010 SP1 Help
Diagnose Availability Service Issues: Exchange 2010 SP1 Help:
"Test-OutlookWebServices -Identity: User1@Contoso.com
- 已使用 Google 工具列寄出"
"Test-OutlookWebServices -Identity: User1@Contoso.com
- 已使用 Google 工具列寄出"
Understanding the Availability Service: Exchange 2010 SP1 Help
Understanding the Availability Service: Exchange 2010 SP1 Help:
"You can use the Exchange Management Shell to configure the Availability service. You can't use the Exchange Management Console to configure the Availability service.
- 已使用 Google 工具列寄出"
"You can use the Exchange Management Shell to configure the Availability service. You can't use the Exchange Management Console to configure the Availability service.
- 已使用 Google 工具列寄出"
GALsync Special - Part 7:: Free Busy with Exchange 2010 - Tools for Exchange & Active Directory
GALsync Special - Part 7:: Free Busy with Exchange 2010 - Tools for Exchange & Active Directory:
"So all clients must be Outlook 2007 or Outlook 2010 to use availability service whcih collects free/busy information directly from mailbox stores.
- 已使用 Google 工具列寄出"
"So all clients must be Outlook 2007 or Outlook 2010 to use availability service whcih collects free/busy information directly from mailbox stores.
- 已使用 Google 工具列寄出"
2010/11/05
如何疑難排解 Exchange 2000 Server 和 Exchange Server 2003 中公用資料夾複寫的問題
如何疑難排解 Exchange 2000 Server 和 Exchange Server 2003 中公用資料夾複寫的問題:
"注意「複寫旗標」登錄值會造成每個公用資料夾均會產生複寫狀態訊息。在產生這些狀態要求訊息後的 6 到 12 小時之間，會針對未同步處理的公用資料夾複本啟動回填作業。有時回填處理程序可能要花 48 到 72 小時或更長的時間才能完成。「在啟動時啟用複寫郵件」登錄值會對公用資料夾階層執行相同的功能。然而，如果要在 Exchange 2000 Server 中設定公用資料夾內容狀態要求訊息的產生，必須設定這兩份「Microsoft 知識庫」文件中所述的登錄值，卸載，然後重新裝載公用資料夾儲存區。啟用公用資料夾內容複寫的狀態要求訊息的能力會先供 2003 年 9 月的 Exchange 2000 Server Post-Service Pack 3 Rollup 使用。
如果要設定公用資料夾複寫狀態要求訊息，請依照下列步驟執行：
1. 請執行「Microsoft 知識庫」文件 321082 中的步驟來設定沒有最新的公用資料夾階層資訊的 Exchange 2000 Server 電腦和 Exchange Server 2003 電腦上公用資料夾複寫狀態要求訊息的登錄值。
2. 卸載後再在設定此登錄機碼的各台 Exchange Server 電腦上重新裝載公用資料夾儲存區。如果要執行這項操作，請依照下列步驟執行：
1. 啟動 [Exchange 系統管理員]。
2. 依序展開 [伺服器]、您的 Exchange Server 電腦、包含要卸載的公用資料夾儲存區的儲存群組以及 [公用資料夾儲存區 (computername)]。
3. 用滑鼠右鍵按一下 [公用資料夾儲存區 (computername)]，然後按一下 [卸載儲存區]。
4. 當您收到下列訊息時，按一下 [是]：
卸載此儲存區會讓所有使用者均無法存取它。
要繼續？
5. 用滑鼠右鍵按一下 [公用資料夾儲存區 (computername)]，然後按一下 [裝載儲存區]。
6. 當您收到下列訊息時，按一下 [確定]：
儲存區已成功裝載。
3. 等候約 12 至 24 小時或更久，然後確認已將整個公用資料夾階層複寫到有此問題的電腦上。
重要您必須先確定已成功複寫公用資料夾階層，才能讓登錄機碼複寫公用資料夾內容。如果伺服器收到階層中不存在的公用資料夾的內容複寫郵件，便會捨棄內容複寫郵件。
4. 在成功複寫公用資料夾階層之後，請執行下列「Microsoft 知識庫」文件中的步驟來設定登錄機碼，以啟用公用資料夾內容複寫狀態訊息：
813629 (http://support.microsoft.com/kb/813629/ ) Update to send status request messages in Exchange 2000 Server
5. 公用資料夾內容複寫的完成時間比公用資料夾階層複寫更長。請等候至少 48 至 72 小時或更久，然後確認已複寫在該公用資料夾儲存區上有複本的所有公用資料夾的公用資料夾內容。
注意如果只要設定公用資料夾階層狀態要求訊息的產生，而不是公用資料夾的內容，則只要設定「Microsoft 知識庫」文件 321082 中所述的登錄機碼就足夠了。
然而，請確定階層中已成功複寫的所有資料夾均包含應有的所有的內容。如果在等候 48 到 72 小時或更長的時間之後，它們並未具備應有的所有內容，請設定「Microsoft 知識庫」文件 813629 中所述的登錄機碼。
- 已使用 Google 工具列寄出"
"注意「複寫旗標」登錄值會造成每個公用資料夾均會產生複寫狀態訊息。在產生這些狀態要求訊息後的 6 到 12 小時之間，會針對未同步處理的公用資料夾複本啟動回填作業。有時回填處理程序可能要花 48 到 72 小時或更長的時間才能完成。「在啟動時啟用複寫郵件」登錄值會對公用資料夾階層執行相同的功能。然而，如果要在 Exchange 2000 Server 中設定公用資料夾內容狀態要求訊息的產生，必須設定這兩份「Microsoft 知識庫」文件中所述的登錄值，卸載，然後重新裝載公用資料夾儲存區。啟用公用資料夾內容複寫的狀態要求訊息的能力會先供 2003 年 9 月的 Exchange 2000 Server Post-Service Pack 3 Rollup 使用。
如果要設定公用資料夾複寫狀態要求訊息，請依照下列步驟執行：
1. 請執行「Microsoft 知識庫」文件 321082 中的步驟來設定沒有最新的公用資料夾階層資訊的 Exchange 2000 Server 電腦和 Exchange Server 2003 電腦上公用資料夾複寫狀態要求訊息的登錄值。
2. 卸載後再在設定此登錄機碼的各台 Exchange Server 電腦上重新裝載公用資料夾儲存區。如果要執行這項操作，請依照下列步驟執行：
1. 啟動 [Exchange 系統管理員]。
2. 依序展開 [伺服器]、您的 Exchange Server 電腦、包含要卸載的公用資料夾儲存區的儲存群組以及 [公用資料夾儲存區 (computername)]。
3. 用滑鼠右鍵按一下 [公用資料夾儲存區 (computername)]，然後按一下 [卸載儲存區]。
4. 當您收到下列訊息時，按一下 [是]：
卸載此儲存區會讓所有使用者均無法存取它。
要繼續？
5. 用滑鼠右鍵按一下 [公用資料夾儲存區 (computername)]，然後按一下 [裝載儲存區]。
6. 當您收到下列訊息時，按一下 [確定]：
儲存區已成功裝載。
3. 等候約 12 至 24 小時或更久，然後確認已將整個公用資料夾階層複寫到有此問題的電腦上。
重要您必須先確定已成功複寫公用資料夾階層，才能讓登錄機碼複寫公用資料夾內容。如果伺服器收到階層中不存在的公用資料夾的內容複寫郵件，便會捨棄內容複寫郵件。
4. 在成功複寫公用資料夾階層之後，請執行下列「Microsoft 知識庫」文件中的步驟來設定登錄機碼，以啟用公用資料夾內容複寫狀態訊息：
813629 (http://support.microsoft.com/kb/813629/ ) Update to send status request messages in Exchange 2000 Server
5. 公用資料夾內容複寫的完成時間比公用資料夾階層複寫更長。請等候至少 48 至 72 小時或更久，然後確認已複寫在該公用資料夾儲存區上有複本的所有公用資料夾的公用資料夾內容。
注意如果只要設定公用資料夾階層狀態要求訊息的產生，而不是公用資料夾的內容，則只要設定「Microsoft 知識庫」文件 321082 中所述的登錄機碼就足夠了。
然而，請確定階層中已成功複寫的所有資料夾均包含應有的所有的內容。如果在等候 48 到 72 小時或更長的時間之後，它們並未具備應有的所有內容，請設定「Microsoft 知識庫」文件 813629 中所述的登錄機碼。
- 已使用 Google 工具列寄出"
XADM: How to Send Replication Status Request Messages in Exchange 2000 Server
XADM: How to Send Replication Status Request Messages in Exchange 2000 Server:
"In Microsoft Exchange Server 5.5, each computer that has a public folder store sends a nightly status request message to determine the state of the public folder hierarchy. Exchange 2000 Server does not do this. Typically, in Exchange 2000 the status request message is only sent out one time during the lifetime of the public folder store; it is sent when the store is created.
However, in certain circumstances you may have to generate a status request message. For example, if the public folder hierarchy on the Exchange 2000 computer does not seem to replicate, or the public folder hierarchy replicates very slowly, the generation of a status request message may permit the public folder hierarchy replication to continue. Issues with public folder hierarchy replication may occur if the original status request message that was sent when the public folder store was created was dropped and never acknowledged, or if the message was sent to a server with a substantially incomplete hierarchy.
A supported feature that modifies Exchange 2000 Server's default behavior is now available from Microsoft. This feature is included in Exchange 2000 Service Pack 3.
- 已使用 Google 工具列寄出"
"In Microsoft Exchange Server 5.5, each computer that has a public folder store sends a nightly status request message to determine the state of the public folder hierarchy. Exchange 2000 Server does not do this. Typically, in Exchange 2000 the status request message is only sent out one time during the lifetime of the public folder store; it is sent when the store is created.
However, in certain circumstances you may have to generate a status request message. For example, if the public folder hierarchy on the Exchange 2000 computer does not seem to replicate, or the public folder hierarchy replicates very slowly, the generation of a status request message may permit the public folder hierarchy replication to continue. Issues with public folder hierarchy replication may occur if the original status request message that was sent when the public folder store was created was dropped and never acknowledged, or if the message was sent to a server with a substantially incomplete hierarchy.
A supported feature that modifies Exchange 2000 Server's default behavior is now available from Microsoft. This feature is included in Exchange 2000 Service Pack 3.
- 已使用 Google 工具列寄出"
XADM: How to Send Replication Status Request Messages in Exchange 2000 Server
XADM: How to Send Replication Status Request Messages in Exchange 2000 Server:
"After you install this feature, you can configure Exchange 2000 Server to generate status request messages for the public folder hierarchy. To do so, you must add the Enable Replication Messages At Startup registry value. To add the registry value, follow these steps.WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
1. Click Start, click Run, type regedt32 in the Open box, and then click OK to start Registry Editor.
2. Locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MsExchangeIS\\Public-(guid)
3. On the Edit menu, click Add Value.
4. In the Value Name box, type Enable Replication Messages At Startup.
5. In the Data Type list, click REG_DWORD, and then click OK.
6. In the Data box, type 1 (one), and then click OK.
Note If you set this value to 1, each time the public store starts, a status request message is sent. If you set the value to 0 (the default setting), no status request message is sent when the public store starts.
7. Quit Registry Editor.
- 已使用 Google 工具列寄出"
"After you install this feature, you can configure Exchange 2000 Server to generate status request messages for the public folder hierarchy. To do so, you must add the Enable Replication Messages At Startup registry value. To add the registry value, follow these steps.WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
1. Click Start, click Run, type regedt32 in the Open box, and then click OK to start Registry Editor.
2. Locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MsExchangeIS\\Public-(guid)
3. On the Edit menu, click Add Value.
4. In the Value Name box, type Enable Replication Messages At Startup.
5. In the Data Type list, click REG_DWORD, and then click OK.
6. In the Data box, type 1 (one), and then click OK.
Note If you set this value to 1, each time the public store starts, a status request message is sent. If you set the value to 0 (the default setting), no status request message is sent when the public store starts.
7. Quit Registry Editor.
- 已使用 Google 工具列寄出"
Update to send status request messages in Exchange 2000 Server
Update to send status request messages in Exchange 2000 Server:
"After you install the hotfix that this article describes, you can configure Exchange 2000 to generate a status request message for each public folder in a public folder store. To do so:
Warning Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall your operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.
1. Start Registry Editor (Regedt32.exe).
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MsExchangeIS\\Public-
3. On the Edit menu, click Add Value.
4. In the Value Name box, type Replication Flags.
5. In the Data Type list, click REG_DWORD, and then click OK.
6. In the Data box, type 1 (one), and then click OK.
7. Quit Registry Editor.
8. Dismount and then remount the public folder store that corresponds to the Public- registry subkey.
When you set the Replication Flags registry value to 1, and then dismount and remount the public folder store, status request messages are generated, and the Replication Flags registry value is automatically reset to 0 (zero).
- 已使用 Google 工具列寄出"
"After you install the hotfix that this article describes, you can configure Exchange 2000 to generate a status request message for each public folder in a public folder store. To do so:
Warning Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall your operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.
1. Start Registry Editor (Regedt32.exe).
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MsExchangeIS\\Public-
3. On the Edit menu, click Add Value.
4. In the Value Name box, type Replication Flags.
5. In the Data Type list, click REG_DWORD, and then click OK.
6. In the Data box, type 1 (one), and then click OK.
7. Quit Registry Editor.
8. Dismount and then remount the public folder store that corresponds to the Public- registry subkey.
When you set the Replication Flags registry value to 1, and then dismount and remount the public folder store, status request messages are generated, and the Replication Flags registry value is automatically reset to 0 (zero).
- 已使用 Google 工具列寄出"
Update to send status request messages in Exchange 2000 Server
Update to send status request messages in Exchange 2000 Server: "
1. Start Registry Editor (Regedt32.exe).
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MsExchangeIS\\Public-
3. On the Edit menu, click Add Value.
4. In the Value Name box, type Replication Flags.
5. In the Data Type list, click REG_DWORD, and then click OK.
6. In the Data box, type 1 (one), and then click OK.
7. Quit Registry Editor.
8. Dismount and then remount the public folder store that corresponds to the Public- registry subkey.
When you set the Replication Flags registry value to 1, and then dismount and remount the public folder store, status request messages are generated, and the Replication Flags registry value is automatically reset to 0 (zero).
- 已使用 Google 工具列寄出"
1. Start Registry Editor (Regedt32.exe).
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MsExchangeIS\\Public-
3. On the Edit menu, click Add Value.
4. In the Value Name box, type Replication Flags.
5. In the Data Type list, click REG_DWORD, and then click OK.
6. In the Data box, type 1 (one), and then click OK.
7. Quit Registry Editor.
8. Dismount and then remount the public folder store that corresponds to the Public- registry subkey.
When you set the Replication Flags registry value to 1, and then dismount and remount the public folder store, status request messages are generated, and the Replication Flags registry value is automatically reset to 0 (zero).
- 已使用 Google 工具列寄出"
XADM: How to Send Replication Status Request Messages in Exchange 2000 Server
XADM: How to Send Replication Status Request Messages in Exchange 2000 Server: "- 已使用 Google 工具列寄出"
After you install this feature, you can configure Exchange 2000 Server to generate status request messages for the public folder hierarchy. To do so, you must add the Enable Replication Messages At Startup registry value. To add the registry value, follow these steps.WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
After you install this feature, you can configure Exchange 2000 Server to generate status request messages for the public folder hierarchy. To do so, you must add the Enable Replication Messages At Startup registry value. To add the registry value, follow these steps.WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
You Had Me At EHLO... : Public Folder Replication Troubleshooting – Part 2: Troubleshooting the Replication of Existing Data
You Had Me At EHLO... : Public Folder Replication Troubleshooting – Part 2: Troubleshooting the Replication of Existing Data: "Use the Synchronize Content option in Exchange 2003 ESM. This is a well-hidden but very useful option. To find it, go under the Public Folders tree and go to the folder in question. Highlight the folder in the left-hand pane. In the right-hand pane click the Status tab. Right-click on the server that has all the data and choose Synchronize Content. This does two things - it causes the server to issue a status request 0x20 for the folder, and it causes it to immediately timeout any backfill entries. Notice that I said you should Synchronize Content from the server that already has the data. You may wonder why you would do that, when it's the other server that has the backfill entries that need to be timed out. Remember that at this point we're just trying to ensure that the server missing the data KNOWS it has something to backfill. To that end, we can use Synchronize Content from the server that has the data to send a 0x20 to the server that doesn't. In this case we're not really interested in seeing a status 0x10 response to the 0x20. We just want the store missing content to receive a replication message for the folder from a store with content, so it can add the appropriate entries to the backfill array. The 0x20 from the server with the data serves this purpose. Note that in Exchange 2003 Sp2, Synchronize Content is now available for the hierarchy by right-clicking on the Public Folders node itself.
- 已使用 Google 工具列寄出"
force public folder replication to Exchange 2007?
- 已使用 Google 工具列寄出"
force public folder replication to Exchange 2007?
You Had Me At EHLO... : Administration of Public Folders with the introduction of Exchange 2007
You Had Me At EHLO... : Administration of Public Folders with the introduction of Exchange 2007: "4. How can I force public folder replication to Exchange 2007?
Replication of information from Exchange 2003 to Exchange 2007 is a combination of the hierarchy information and the content for each of the replicas.
To initiate hierarchy and content replication, use the 'Resend changes' and 'Synchronize content' options in Exchange 2003 ESM. Read more about those here.
Use the following Exchange Management Shell script to push hierarchy from a 2007 server:
Update-publicfolderhierarchy –server <2007 server that is the source of the replication hierarchy>
Use the following Exchange Management Shell script to push content from a 2007 server :
Update-publicfolder –id -server <2007 server that is the source of the replication data>
Of course, you can read more about CMDlets used above in Exchange 2007 documentation.
- 已使用 Google 工具列寄出"
Replication of information from Exchange 2003 to Exchange 2007 is a combination of the hierarchy information and the content for each of the replicas.
To initiate hierarchy and content replication, use the 'Resend changes' and 'Synchronize content' options in Exchange 2003 ESM. Read more about those here.
Use the following Exchange Management Shell script to push hierarchy from a 2007 server:
Update-publicfolderhierarchy –server <2007 server that is the source of the replication hierarchy>
Use the following Exchange Management Shell script to push content from a 2007 server :
Update-publicfolder –id -server <2007 server that is the source of the replication data>
Of course, you can read more about CMDlets used above in Exchange 2007 documentation.
- 已使用 Google 工具列寄出"
You Had Me At EHLO... : Public Folder Replication Fails Due To Empty Legacy Administrative Group
You Had Me At EHLO... : Public Folder Replication Fails Due To Empty Legacy Administrative Group: "- 已使用 Google 工具列寄出"
Log Name: Application
Source: MSExchange Store Driver
Event ID: 1020
Level: Error
Description:The store driver couldnt deliver the public folder replication message "Hierarchy (PublicFolder@contoso.com)" because the following error occurred: The Active Directory user wasn't found.
2010/11/04
MSExchange Store Driver
MSExchange Store Driver: "- 已使用 Google 工具列寄出"
Description:
The store driver couldn't deliver the public folder replication message "Status (MY-EX002-IS@logicacmg.com)" because the following error occurred: MapiExceptionDuplicateDelivery: Unable to deliver message. (hr=0x80004005, ec=2603)
Diagnostic context:
Description:
The store driver couldn't deliver the public folder replication message "Status (MY-EX002-IS@logicacmg.com)" because the following error occurred: MapiExceptionDuplicateDelivery: Unable to deliver message. (hr=0x80004005, ec=2603)
Diagnostic context:
2010/11/02
Exchange 2007 Issues: Mailbox Management
Exchange 2007 Issues: Mailbox Management: "- 已使用 Google 工具列寄出"
Exchange 2003 move mail to exchange 2010 fail
error msg :
錯誤:
kh-srvdc.xxxx.com 上的 Active Directory 作業失敗。此錯誤無法重試。其他資訊: 存取權限不足，無法執行操作。。
Active Directory 回應: 00002098: SecErr: DSID-03150E8A, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
使用者的存取權限不足。
開啟 dsa.msc 已驗證的使用者要能繼承權限
Exchange 2003 move mail to exchange 2010 fail
error msg :
錯誤:
kh-srvdc.xxxx.com 上的 Active Directory 作業失敗。此錯誤無法重試。其他資訊: 存取權限不足，無法執行操作。。
Active Directory 回應: 00002098: SecErr: DSID-03150E8A, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
使用者的存取權限不足。
開啟 dsa.msc 已驗證的使用者要能繼承權限
訂閱：
文章 (Atom)